Blye Engineering Co. Limited manufactures and designs tailor-made stores for any size and temperature of product required to be stored. 

Free Standing Cold Rooms

Can be used within catering establishments such as restaurants, confectioneries, hotel kitchens, bakeries, self-service stores and supermarkets.

 

 

 

 

 

 

 

Walk-in Cold Room

Used primarily for perishable goods, wholesale storage, fish or poultry processors, flower-growers, and dairy products producers, amongst others. 

 

 

 

 

 

Catering-type, Free-Standing Fridge / Freezer

For operators in the catering industry where different products need to be stored at different temperatures. 

  

Cold Stores

For perishable goods especially in the manufacturing of the  food industry. 

  

PANELS

Blye Panels are of the sandwich type manufactured in the largest feasible sizes finished in fibreglass sheets with gelcoat or in metal food-safe plastic coated sheets. These are injected with polyurethane foam insulation at a density of 40Kb/m3. Panel thicknesses range from 40mm to 150mm depending on the temperatures required.

 

 

The panels are joined by a special BLYE PVC extrusion that enables the panels to interlock throughout. Panels may be supplied to the following maximum sizes: 10 x 4 metres and 14 x 3 metres.

For catering-type fridge / freezer and free-standing cold rooms, floor panels are available in 5-Bar Thread Plate aluminium. For walk-in cold rooms / cold stores we normally lay polyurethane panels and finish in concrete or tiled flooring for hard wearing industrial use. All doors supplied (sliding or hinged, single or double leaf) for negative temperatures will be equipped with heaters.

 

All Blye cold rooms may be dismantled and re-installed without having to break off or replace panels. Blye cold rooms may also be extended if this is required at a later stage.

 

REQUESTING A COLD ROOM QUOTATION

In order to enable us to quote for any size or type of cold room, kindly forward the following information:

  • Width of cold room (external measurement)

  • Length of cold room (external measurement)

  • Height of cold room (external measurement)

  • Number of doors required, single leaf, double leaf, or sliding

  • Product to be stored in cold room

  • Type of electricity supply available

  • If floor insulation is to be supplied as a panel complete with non-slip aluminium base or if polyurethane insulation finished in concrete or tiles. (We recommend that small cold rooms under 12 square metres will be supplied with non slip aluminium panel, while for big cold rooms especially where pallet trucks or fork lifts will be used we recommend polyurethane finished with concrete floor.)

  • For blast freezers also please advise temperature of product going in and out, duration of blasting time, and weight of product.